Pathloss 5.0 : Installation Manual

View previous topic View next topic Go down

Pathloss 5.0 : Installation Manual

Post  anwar on Tue Feb 23, 2010 6:00 pm

This Topic will discuss about Pathloss 5.0. Pathloss 5.0 is new software manufactured by Cte and already published at march 2009. Pathloss 5.0 last update is 27th October 2009.

First step you need to do for running pathloss 5.0 on your machine is installing pathloss.

CHAPTER 1 : STEP BY STEP INSTALL PATHLOSS 5.0

1. Click pathloss 5.0 windows installer package
2. Choose typical installation, and click next until installation finished
3. After installation finished, pathloss 5.0 will shown on your program files

[You must be registered and logged in to see this image.]

Figure 1. Pathloss 5.0 at program

Pathloss 5.0 have 4 module at program files. There are:

1. Antrad : This program to convert antenna data base, radio data base, etc

[You must be registered and logged in to see this image.]
Figure 2. AntRad Module

b. Convert 24Bit : Convert image that can be used as backdrop image for pathloss 5.0
[You must be registered and logged in to see this image.]
Figure 3. Convert 24 Bit Module

c. Pathloss 5.0 : as like newtwork module on pathloss 4.0
[You must be registered and logged in to see this image.]
Figure 4. Pathloss 5


d. Pathloss 5.0 link : as like worksheet module on pathloss 5.0
[You must be registered and logged in to see this image.]
Figure 5. Pathloss 5.0 Link Module

When your pathloss not initialized yet, only module AntRad can be used, and for another 3 module disabled. Next step for installation pathloss is

1. Initialized Program

First step you need to enter your pathloss serial number that already sent with your pathloss installation package. After enter your pathloss installation serial number, you will ask to activate yout pathloss. There is 3 option to activate your serial number. You can choose by phone, by email, or by internet (online). After finished your program activation you will able to know your pathloss installation support. This pathloss installation support can check at help menu.

[You must be registered and logged in to see this image.]
Figure 6. Pathloss License Information

Note : I need to hiding my serial number to keep my privacy ^_^.

Pathloss 5.0 Have a good terrain looked. have 3 D view and More detail about topology map....I'll discuss for next Chapter..and For Chapter 1 i thing enough ^_^
[You must be registered and logged in to see this image.]
Figure 7. Terrain view at Pathloss 5.0
avatar
anwar
Admin

Posts : 16
Join date : 2010-02-23
Age : 31
Location : Jakarta

http://www.pathloss40.co.cc

Back to top Go down

test

Post  Admin on Tue Feb 23, 2010 6:28 pm

test Smile

Admin
Admin

Posts : 10
Join date : 2010-02-23

http://pathloss40.forumotions.net

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum